Configuring Your Intel Rmm3 Using The Intel Deployment Assistant (Ida); Figure 9: Ida Configure Server: Communication Options Window - Intel Remote Management Module 3 User Manual

Intel® Remote Management Module 3 User Guide Configuring Intel® RMM3
4.2 Configuring Your Intel RMM3 Using the Intel Deployment Assistant (IDA)
® ®
The following section explains the RMM3 configuration using the IDA.
WARNING
If you need to configure both channel 1 and RMM3, ensure that they are connected
to different subnets.
Note: When using IDA to setup Intel® RMM3 Lite on Intel® S3420GPRX user can only
configure BMC channel1. Since RMM3 Lite has no dedicated NIC, the BMC channel 3
configuration with IDA is disabled. The user can access RMM3 Lite advance features from
onboard NIC 5 (BMC channel 1).
1. After selecting Server Management settings you should get a window as shown in Figure 9.
Select which channel you would like to configure.

Figure 9: IDA Configure Server: Communication Options Window

Revision 1.3 17