Configuring Your Server Using Intel System Configuration Utility (Sysconfig); Running The Sysconfig; Configuring Ip Address; Configuring Users - Intel Remote Management Module 3 User Manual

Intel® Remote Management Module 3 User Guide
4.3 Configuring Your Server Using Intel System Configuration Utility
(SysConfig)
This section explains how to configure using Sysconfig commands.

4.3.1 Running the Sysconfig

To run Sysconfig enter the Sysconfig directory using this command:
cd /usr/local/syscfg

4.3.2 Configuring IP address


To set static IP address:
syscfg -le 3 static <STATIC_IP> <SUBNET_MASK> -lc 3 12
<DEFAULT_GATEWAY_IP>

To set dhcp IP address:
syscfg -le 1 dhcp

Additionally, to enable SOL (can be used for either static or DHCP)
To enable Serial Over LAN (SOL)
syscfg -sole 3 Enable Admin BAUD_RATE RETRY_COUNT
RETRY_INTERVAL_IN_MILLISECONDS

4.3.3 Configuring Users


To enable a user for RMM3 channel
syscfg -up 3 3 Admin sol -ue 3 Enable 3
Revision 1.3
Configuring Intel® RMM3
25