Remotesap2; Supported Properties; Supported Verbs; Figure 65: Remotesap1 Target - Intel Remote Management Module 3 User Manual

SMASH–Lite* Interface
(System Management Architecture for Server Hardware* by AMI*)Intel® Remote Management Module 3 User Guide

8.13 Remotesap2

8.13.1 Supported Properties

The supported properties of the target remotesap2 are as follows:
Property
dnsserveraddress
Identity

8.13.2 Supported Verbs

The supported verbs of the remotesap2 target are as follows.
Verb
cd
exit
help
set
78

Figure 65: REMOTESAP1 Target

Table 34: Remotesap2 - Supported Properties

Gives the dns server address. This is a R/W property. The value of this property
can be set as follows:
> set dnsserveraddress=0.0.0.0
This read only property gives a brief explanation of the present target and
cannot be changed.

Table 35: Remotesap2 - Supported Verbs

change from one valid target path to any other valid target path.
exit from the current SMASH* session.
provide information on using SMASH*.
set the r/w supported properties
Task
Is used to
Revision 1.3