Remotesap1; Supported Properties; Supported Verbs; Figure 62: Ipendpt1 Target - Intel Remote Management Module 3 User Manual

SMASH–Lite* Interface
(System Management Architecture for Server Hardware* by AMI*)Intel® Remote Management Module 3 User Guide

8.10 Remotesap1

The remotesap1 target will enumerate all the configurable IPs under the containing target. A
remote access server enables users who are not on a local network to access. This does not
contain any targets.

8.10.1 Supported Properties

The supported properties of the target remotesap1 are as follows:
Property
defaultgatewayaddress
Identity

8.10.2 Supported Verbs

The supported verbs of the remotesap1 target are as follows.
74

Figure 62: IPENDPT1 Target

Table 28: Remotesap1 - Supported Properties

 IP address of the gateway. A gateway address is a private address and is the
address to which traffic is sent from the LAN .This is an R/W property. The
value of the gateway can be set as follows:
> Set defaultgatewayaddress =0.0.0.0
This read only property gives a brief explanation of the present target and
cannot be changed.
Task
Revision 1.3