Dnsendpt1; Supported Properties; Figure 63: Remotesap1 Target; Table 29: Remotesap1 - Supported Verbs - Intel Remote Management Module 3 User Manual

Intel® Remote Management Module 3 User Guide
Verb
cd
exit
help
set
show
version

8.11 Dnsendpt1

The dnsendpt target has the configurable parameters for Domain Name System (DNS). The
DNS associates various sorts of information with so-called domain names; most importantly, it
serves the Internet by translating human-readable computer hostnames into the IP address,
information that the networking equipment needs to deliver.Dnsendpt1 contains two targets -
remotesap1 and remotesap2. The supported properties of dnsendpt1 are as follows:

8.11.1 Supported Properties

The supported properties of the target dnsendpt1 are as follows:
Revision 1.3
(System Management Architecture for Server Hardware* by AMI*)

Table 29: Remotesap1 - Supported Verbs

change from one valid target path to any other valid target path.
exit from the current SMASH* session.
provide information on using SMASH*.
set the r/w supported properties
show all the targets, properties, and verbs supported by this target.
show the current version of SMASH*.

Figure 63: REMOTESAP1 Target

Is used to
SMASH–Lite* Interface
75