Intel® Remote Management Module 3 User Guide
1.
Introduction
®
The Intel
RMM3 works as an integrated solution on your server system. Based on an
embedded operating system, the Intel
and permanent availability independent of the present state of the server's operating system. As
a system administrator, you can use the Intel
access to respond to critical incidents and to undertake necessary maintenance.
Designed to work with the Baseboard Management Controller (BMC), this small form-factor
mezzanine card enables server control from a built-in Web Console from anywhere, anytime.
This User Guide describes how to use the Intel
®
referred to as Intel
RMM3). It provides an overview of the features of the module and
instructions on how to set up and operate the Intel
1.1
Target Audience
This Guide is intended for system technicians who are responsible for installing,
troubleshooting, upgrading, and repairing the Intel
use it to work on the Intel
critical incidents.
1.2
Terminology
The following table lists the terminology used in this document and the description:
Word/Acronym
ARP
BMC
CLI
DDC
DHCP
DVC
DVO
EDID
FML
FPGA
ICMP
Intel
®
ASMI
Intel
®
RMM3
IPMI
ITE
KVM
MAC
MII
Revision 1.3
®
RMM3 add-on card provides both exceptional stability
®
®
RMM3 to gain location-independent remote access to respond to
Table 1: Terminology
Address Resolution Protocol
Baseboard Management Controller
Command Line Interface
Display Data Channel
Dynamic Host Configuration Protocol
Dambrackas* Video Compression
Dynamic Visual Output
Extended Display Identification Data
Fast Management Link
Field Programmable Gate Array
Internet Control Message Protocol
Intel
®
Advanced Server Management Interface
Intel
®
Remote Management Module 3
Intelligent Platform Management Interface
Information Technology Equipment
Keyboard, Video and Mouse
Media Access Controller
Media Independent Interface
RMM3 to gain location-independent remote
®
Remote Management Module 3 (hereinafter
®
RMM3.
®
RMM3. As a system administrator, you can
Definition
Introduction
1
Need help?
Do you have a question about the Remote Management Module 3 and is the answer not in the manual?
Questions and answers