Table of Contents
Advertisement
Intel® RMM3 Web Console Options
Intel® Remote Management Module 3 User Guide
Figure 37: System Information FRU Information page
7.1.3 Viewing System Diagnostics
The System Diagnostic page can be used to download a file that contains data that was
collected when a Catastrophic Error (CATERR) occurred on the system. When the BMC
firmware sees CATERR asserted it will try to collect Global error registers data from the chipset
on the board. This data can be used to help diagnose what could have caused the CATERR.
To create the log file, press the Run Diagnostics button. It may take some time for the file to be
created.
Once the diagnostic log dump is finished you can click the diagnostic log filename to save the
results as a .zip file on your client system. The file can then be sent to your system
®
manufacturer or an Intel
support engineer for analysis.
44
Revision 1.3
Advertisement
Table of Contents
Need help?
Do you have a question about the Remote Management Module 3 and is the answer not in the manual?
Questions and answers