Figure 10: Ida Configure Server: Configure Lan Channel - Intel Remote Management Module 3 User Manual

Intel® Remote Management Module 3 User Guide
2. Select IP Address from a DHCP Server or Static IP Address
a. If IP Address from a DHCP Server is selected configure the DHCP Host Name as
shown in Figure 11.
b. If Static IP Address is selected configure the IP address, Subnet Mask and
Gateway as shown in Figure 10.
3. You can also select Enable Serial Over LAN on these screens.
Figure 10: IDA Configure Server: Configure LAN Channel 3 (Intel
Revision 1.3
Configuring Intel® RMM3
®
RMM3) settings window 1
19