12.3.3 I/O Point Control
This feature allows you to toggle any output on or off and trip any input device. This can be
useful to test a point's output mapping.
Follow these steps to control a I/O point:
1. Select
(Point Functions) from the Main Menu.
2
2. Select
(I/O Point Control).
6
3. Select the Module the point is on.
4. Enter the zone number , or press the
then press
.
5. Press
to generate an alarm for an input point or activate an output point.
6. To exit press
.
151430
or
arrow to select the point you wish to test,
firealarmresources.com
Testing and Troubleshooting
12-5