Input Events - User Option - Honeywell Notifier ID60 Series Operating Manual

4
A B
H
PLANT 01 / 10
< - - - Zone Text - - - >
PLANT
< - - - Zone Text - - - >
2
ID50 Series Panel - Operating Manual

4.12.4 Input Events - User Option

The Input Events menu option allows the user to view
active input events/plant alarms while the normal active
input events/plant alarms display has been overridden
by a higher priority display (alarms). To view Plant Alarms,
from the VIEW Mode menu:
1 Using the numeric keypad, press the '
select the Input Events display.
[U0 View] 1:Log
4:Input Events
2 The LCD automatically displays either:
a. The first input event, or
PLANT
< - - - Zone Text - - - >
b. The 'No Warnings message', if there are no current
input events recorded on the system.
The system has NO warnings present
3 If a number of input events are present, press the
'
2
C D E F
Z21 M12 AUX 14:55
< - - - Device Text - - - >
02 / 10 Z17 M05 MON
< - - - Device Text - - - >
Note: Plant alarms for Hold Switch and Abort Switch
inputs are entered as AUX events in the Fault list.
These input events are not processed by any CBE
rules.
4 Press the '
menu.
41
2:Devices 3:Faults
5:Disabled
01 / 10 Z21 M12 AUX
< - - - Device Text - - - >
/ ' buttons to scroll through the entries:
8
a. Plant Alarm condition
b. Alarm currently displayed.
G
c. Number of alarms.
d. Zone Number.
e. Device Address.
8
f. Device Type.
g. Time alarm was logged.
15:05
h. Zonal and Device text
(if any).
' button to return to the View Mode
4
997-264-000-10, Issue 10
' button to
4
: More
14:55
<:Exit
January 2010