Chapter 1: Overview
Analysis Probe
Analysis Probe
This section lists equipment supplied with the analysis probe and
equipment requirements for using the analysis probe.
Equipment supplied
The equipment supplied with the analysis probe is shown in the
illustration on the next page. It is listed below:
• The HP E2480A analysis probe circuit board.
• Four HP E5346A high-density termination cables.
• Logic analyzer configuration files and inverse assembler software on a CD-
ROM (for HP 16600A/700A series logic analysis systems).
• Logic analyzer configuration files and inverse assembler software on five
3.5-inch disks (for other HP logic analyzers).
• This User's Guide.
• A package-specific probing kit (see below).
Processor
132-pin PQFP
Package
132-pin
Transition Board
E3417A
Equipment
Probe Adapter
Supplied
User's Guide
20
144-pin TQFP
160-pin QFP
144-pin
160-pin
Transition Board
Transition Board
E5336A
E5373A
Probe Adapter
Probe Adapter
E5338A
E5350A
Flexible Cable
Flexible Cable
User's Guide
User's Guide
Solutions for CPU32