HP 16600A Series User Manual page 256

Chapter 12: Troubleshooting the Analysis Probe
Inverse Assembler Problems
file. Do not change the names of these labels or the bit assignments
within the labels. Some analysis probes also require other data labels.
See Chapter 10, "Hardware Reference," beginning on page 217 for
more information.
Inverse assembler will not load or run
You need to ensure that you have the correct system software loaded
on your analyzer.
❏ Ensure that the inverse assembler is on the same disk as the configuration
files you are loading.
Configuration files for the state analyzer contain a pointer to the name
of the corresponding inverse assembler. If you delete the inverse
assembler or rename it, the configuration process will fail to load the
disassembler.
See Chapter 4, "Analyzing the CPU32 with a Logic Analyzer," beginning
on page 89 for details.
Solutions for CPU32 255