This message indicates that the ending date or time occurs before the starting
date and time.
To solve this problem:
Reenter the stop date and time. Remember that the time is entered in a
l
24-hour, hour, minute format.
This message indicates that the analyzer cannot write to the RAM card
because the RAM card has not been inserted into the memory card reader or
the write-protect switch on the RAM card is set to the write-protect position.
To solve this problem:
Insert the RAM card in the analyzer's memory card reader.
l
Move the write-protect switch away from the "SAFE" position. See
l
"Formatting a RAM Card" in Chapter 3 for more information.
I -
If You Have a Problem
Error Messages
4-5