Table of Contents
Advertisement
4 Install the emulation module.
5 Connect the cable and re-install the screws.
6 Reinstall the cover.
7 Plug in the power cord, reconnect the other cables, and turn on
See Also
Chapter 6: Connecting and Configuring the Emulation Module
Installing the Emulation Module
Tighten the screws snugly ( 2 N·m or 18 inch-pounds).
the logic analysis system.
The new emulation module will be shown in the system window.
See page 144 for information on giving the emulation module a
"personality" for your target processor.
To test the emulation module
If this is the first time that you have used the emulation module, you
should run the built-in performance verification test before you
connect to a target system. Refer to page 276 for information on
performance verification.
138
Solutions for CPU32
Advertisement
Table of Contents
