Installing The 4Lff Display Port/Usb Option - Hitachi Advanced Server HA810 G2 User Manual

Installing the 4LFF display port/USB option

Prerequisites
Before installing this option, be sure you have the following:
• The components included with the hardware option kit
T-10 Torx screwdriver
•
Procedure
Power down the server.
1.
Remove all power:
2.
a. Disconnect each power cord from the power source.
b. Disconnect each power cord from the server.
Do one of the following:
3.
a. Extend the server from the rack.
b. Remove the server from the rack.
Remove the access panel.
4.
Using a Torx T-10 screwdriver, remove the 4LFF display port/USB blank.
5.
Hitachi Advanced Server HA810 G2 User Guide 59