Table of Contents
Advertisement
Before installing persistent memory modules, make sure that the following components and software are
available:
•
A supported HA810 G2 Server using third-generation Intel Xeon Scalable
processors.
•
DDR4 Standard Memory RDIMMs or LRDIMMs (the number will vary based
on your chosen configuration).
•
Supported firmware and drivers:
o
System ROM version 1.40 or later
o
Server Platform Services (SPS) Firmware version 04.04.04.053
iLO 5 Firmware version 2.44
o
o
Innovation Engine Firmware version 1.0.0.20 or later
To download the latest firmware, see
https://support.hitachivantara.com/en/user/answers/downloads.html#hardware-download
A supported operating system:
•
o
Windows Server 2016 with persistent memory drivers from Hitachi Vantara
o
Windows Server
Red Hat Enterprise Linux 7.9 and later
o
o
Red Hat Enterprise Linux 8.2 and later
o
SUSE Linux Enterprise Server 12 SP5 and later
o
SUSE Linux Enterprise Server 15 SP2 and later
VMware vSphere 7.0 U2 and later
o
o
VMware vSphere 6.7 U3 with P03
Hardware and licensing requirements for optional encryption of the persistent memory
modules:
TPM 2.0 (local key encryption)
•
o
iLO Advanced License (remote key encryption) Key
o
Management server (remote key encryption)
For more information, see the Persistent Memory User Guide on the Hitachi Vantara website.
Installing persistent memory modules
Use this procedure only for new persistent memory module installations. If you are migrating this persistent
memory module from another server, see the Persistent Memory User Guide on the Hitachi Vantara website.
Prerequisites
Before you perform this procedure, make sure that you have the following items available:
The components included with the hardware option kit
•
•
A T-10 Torx screwdriver might be needed to unlock the access panel.
Procedure
1. Observe the following alerts:
CAUTION: DIMMs and persistent memory modules are keyed for proper alignment. Align notches on the
DIMM or persistent memory module with the corresponding notches in the slot before installing the
component. Do not force the DIMM or persistent memory module into the slot. When installed properly,
not all DIMMs or persistent memory modules will face in the same direction.
Hitachi Advanced Server HA810 G2 User Guide
53
Advertisement
Table of Contents
