Table of Contents
Advertisement
Description
Power supply LEDs
PCI riser LED
Over temp LED
Power cap LED
Amp Status LED
1 Embedded NIC ports are not equipped on the server. NIC LEDs on the Systems Insight Display will
flash based on the network adapter port activity. In the case of a dual-port adapters, only NIC LED 1
and 2 will illuminate to correspond with the activity of the respective network ports.
When the health LED on the front panel illuminates either amber or red, the server is experiencing a health event.
For more information on the combination of these LEDs, see Systems Insight Display combined LED descriptions.
Systems Insight Display combined LED descriptions
The combined illumination of the following LEDs indicates a system condition:
Systems Insight Display LEDs
•
System power LED
•
Health LED
•
Systems Insight
Display LED and
color
Processor (amber)
Processor (amber)
Off = Normal
Solid amber = Power subsystem degraded, power supply failure, or
input power lost.
Off = Normal
Amber = Incorrectly installed PCI riser cage
Off = Normal
Amber = High system temperature detected
Off = System is in standby, or no cap is set.
Solid green = Power cap applied
Solid green = AMP mode enabled Solid amber = Failover
Flashing amber = Invalid configuration
Health LED
Red
Amber
Hitachi Advanced Server HA810 G2 User Guide
Status
System power
LED
Amber
One or more of the following
conditions might exist:
•
•
•
•
Green
Processor in socket X is in a pre-
failure condition.
Status
Processor in socket X has
failed.
Processor X is not installed in
the socket.
Processor X is unsupported.
ROM detects a failed
processor during POST.
14
Advertisement
Table of Contents
