Installing A High Performance Heatsink - Hitachi Advanced Server HA810 G2 User Manual

Installing a high performance heatsink

Prerequisites
CAUTION: Installing a high performance heatsink requires the installation of a processor assembly onto
the heatsink. To avoid damage to server or components, do not remove or install the processor
assembly when installing or replacing other heatsinks.
Before installing this option, be sure that you have the following:
• The components included with the hardware option kit
• T-30 Torx screwdriver
Procedure
Observe the following alerts.
1.
CAUTION: The processor assembly must be removed and replaced as a unit. Do not remove the processor from the
carrier.
CAUTION: When handling the heatsink, always hold it along the top and bottom of the fins. Holding it from the sides
can damage the fins.
CAUTION: THE CONTACTS ARE VERY FRAGILE AND EASILY DAMAGED. To avoid damage to the socket
or processor, do not touch the contacts.
Power down the server.
2.
Remove all power:
3.
a. Disconnect each power cord from the power source.
b. Disconnect each power cord from the server.
Do one of the following:
4.
a. Extend the server from the rack.
b. Remove the server from the rack.
Remove the access panel.
5.
Observe the following cautions.
6.
CAUTION: Be sure to loosen each heatsink nut in the order indicated. Otherwise, damage might occur to the heatsink
or processor.
Hitachi Advanced Server HA810 G2 User Guide 94