Hitachi Advanced Server HA810 G2 User Manual page 78

Install the full height PCIe x16 riser cage latch.
9.
Use a T-15 Torx screwdriver to install the riser cage screw.
10. Install the riser cage.
Install one of the following, as needed:
11.
• Expansion boards (Expansion boards)
• GPU (GPU)
• Controllers (Controllers)
12. Install the access panel (Install the access panel).
13. Install the server in the rack.
14. Connect each power cord to the server.
15. Connect each power cord to the power source.
16. Power up the server (Power up the server).
Hitachi Advanced Server HA810 G2 User Guide 78