Hitachi Advanced Server HA810 G2 User Manual page 11

Item
4 NIC status LED
1 When all four LEDs described in this table flash simultaneously, a power fault has occurred.
Facility power is not present, power cord is not attached, no power supplies are installed, power
2
supply failure has occurred, or the power button cable is disconnected.
If the health LED indicates a degraded or critical state, review the system IML or use iLO to review
3
the system health status.
4LF
Item
1 UID button/LED
2 NIC status LED
Description
Flashing green = iLO is rebooting.
Flashing amber = System degraded
Flashing red = System critical
1 Solid green = Link to network
Flashing green = Network active
Off = No network activity
Description
1
1
Hitachi Advanced Server HA810 G2 User Guide
Status
3
Status
Solid blue = Activated.
Flashing blue
• 1 Hz = Remote management or firmware
upgrade in progress
4 Hz = iLO manual reboot sequence initiated.
8 Hz = iLO manual reboot sequence in progress.
Off = Deactivated.
Solid green = Link to network.
Flashing green = Network active.
Off = No network activity.
11