Hitachi Advanced Server HA810 G2 User Manual page 98

Observe the following alerts:
1.
WARNING: To reduce the risk of personal injury from hot surfaces, allow the drives and the
internal system components to cool before touching them.
CAUTION: To prevent damage to electrical components, properly ground the server before
beginning any installation procedure. Improper grounding can cause electrostatic discharge.
Back up all server data.
2.
Power down the server.
3.
Remove all power:
4.
a. Disconnect each power cord from the power source.
b. Disconnect each power cord from the server.
Do one of the following:
5.
a. Extend the server from the rack.
b. Remove the server from the rack.
Remove the access panel Remove the access panel.
6.
Disconnect the cable from the system board.
7.
Hitachi Advanced Server HA810 G2 User Guide 98