Systems Insight Display Combined Led Descriptions - Hitachi HA820 G3 Series User Manual

When the health LED on the front panel illuminates either amber or red, the server is experiencing a health
event. For more information on the combination of these LEDs, see Systems Insight Display combined
LED descriptions.

Systems Insight Display combined LED descriptions

The combined illumination of the following LEDs indicates a system condition:
• Systems Insight Display LEDs
• System power LED
• Health LED
Systems Insight Display
LED and color
Processor (amber)
Processor (amber)
DIMM (amber)
DIMM (amber)
Over temp (amber)
Over temp (amber)
PCI riser (amber)
Fan (amber)
Fan (amber)
Health System
LED power LED
Red Amber
Amber Green
Red Green
Amber Green
Amber Green
Red Amber
Red Green
Amber Green
Red Green
Systems Insight Display combined LED descriptions
Status
One or more of the following
conditions might exist:
• Processor in socket X has failed.
• Processor X is not installed in the
socket.
• Processor X is unsupported.
• ROM detects a failed processor
during POST.
Processor in socket X is in a pre-
failure condition.
One or more DIMMs have failed.
DIMM in slot X is in a pre-failure
condition.
The Health Driver has detected a
cautionary temperature level.
The server has detected a hardware
critical temperature level.
The PCI riser cage is not seated
properly.
One fan has failed or has been
removed.
Two or more fans have failed or been
removed.
Table Continued
14