Codabar Concatenation - Honeywell 5010 User Manual

When Check Character is set to Validate, but Don't Transmit , the unit will only
read Codabar bar codes printed with a check character, but will not transmit the
check character with the scanned data.
* No Check Character
Validate Modulo 16, but
Don't Transmit
Validate Modulo 16
and Transmit

Codabar Concatenation

Codabar supports symbol concatenation. When you enable concatenation, the
imager looks for a Codabar symbol having a "D" start character, adjacent to a
symbol having a "D" stop character. In this case the two messages are
concatenated into one with the "D" characters omitted. Default = On.
Character
Start Stop Start Stop
Codabar
A12D D34A
Select Require to prevent the imager from decoding a single "D" Codabar
symbol without its companion. This selection has no effect on Codabar symbols
without Stop/Start D characters.
* On
Off
Require
7 - 4