Measurement Configuration - MICRO-EPSILON interferoMETER IMS5400-DS19 Quick Manual

Initial Operation

Measurement Configuration

Common measurement configurations (presets) for
various target surfaces are stored on the controller. This
allows you to quickly start with your individual measure-
ment task. In a preset the basic features like peak or ma-
terial selection and calculation functions are already set.
The signal quality is set to Balanced at the factory.
Go to the Home > Measurement configuration
menu and start the Measurement configura-
tion.
Select a configuration.
IMS5x00
Then, you can apply your own settings (setups). When
saving a modified preset, the web interface displays a
dialog for entering a setup name. This prevents presets
from being overwritten by accident.
Data output only starts when the associated interface is
activated.
Page 25