Adjusting Position By Entering Latitude ／ Longitude On Own Ship - JRC JMA-3910-4 Instruction Manual

7.5.7.4 Adjusting Position by Entering Latitude ／ Longitude on Own Ship
1. Follow procedures 1 and 2 in subsection 7.5.7.1 to open the INIT SETTING
Procedures
#3 menu.
2. Press the
3. Press the
(south latitude) using numeric keys and press the
4. Enter an adjustment value for E (east longitude) / W (west longitude) using
numeric keys and press the
The data input from the GPS, if any, is prioritized.
5. Press the
Exit
INIT SETTING #3
INIT SETTING #3
Press an item number key.
0. PREVIOUS MENU
1. SHIFT COAST LINE #1
(RADAR PICTURE)
2. SHIFT COAST LINE #2
3. LAT ／ LON CORRECTION
4. CHART CENTER POSITION
5. DATA INPUT FORMAT
6. DATA ／ TIME
7. SHIP'S TYPE
8.
9. NEXT MENU
To close this menu, Press (SUB MENU) key.
4
key to select "CHART CENTER POSITION".
4
key, enter an adjustment value for N (north latitude) / S
ENT
key.
SUB
key.
MENU
SETTING DELETE
N 0.000'
E 0.000'
N 0.000'
E 0.000'
N 35˚00.000'
E 135˚00.000'
183 JRC
OFF UTC
FISHING BOAT
7 – 56
ENT
key.
180
LOCAL
MERCHANT
7.5
7