Table of Contents
Advertisement
3 - CONTROLS/INSTRUMENTS
Emergency exit hammer
Located on the left-hand cab, use the hammer (1) to break
the rear window, and then push the window strongly and
escape outside.
Consult your CASE CONSTRUCTION dealer for window
installation.
ATTENTION: Do not break the rear window except when
it is absolutely necessary, such as to escape in an emer-
gency.
ATTENTION: Do not place anything in front of the window.
Doing so may obstruct an emergency escape.
1
KUXZSM-001
Tool quick coupler locking and unlocking control switch (Optional)
This switch is located on the left-hand control arm.
To unlock pull the locking pin (1) towards you and simul-
taneously press the top of the switch. In this position, the
audible alarm device sounds and the tool can be installed
or removed.
NOTE: For safety reasons, the switch cannot be operated
by simply pressing the top.
To lock, press the bottom of the switch. In this position,
the audible alarm device will cease to function.
NOTE: When locking, it is not necessary to operate the
locking pin (1).
ATTENTION: Each time you change a tool, be sure to
1
DEDABC1A
place the switch in locked position.
3-51
Advertisement
Table of Contents
