Table of Contents
Advertisement
Replacing the return filter
1. Release all pressure in the hydraulic reservoir. Refer
to page 6-34.
2. Clean the top of the hydraulic reservoir and clean the
return filter cover.
3. Remove the cover (1) and O-ring (2).
4. Take out the filter (3).
5. Install a new filter (3).
6. Check O-ring (2) and change it if worn or damaged.
7. Install the cover (1).
8. Check the level of the hydraulic fluid and add more if
necessary. See "Filling the reservoir".
Replacing the reservoir breather filter element
1. Press the button (1) to release all pressure in the hy-
draulic reservoir.
6 - MAINTENANCE
6-40
8
3FDE9D5B
9
D316E823
10
C80D0A3E
Advertisement
Table of Contents
