Table of Contents
Advertisement
Automatic regeneration
The machine may be operated normally during automatic regeneration.
• No switch operation is required.
• The engine sound changes during automatic regeneration.
This does not imply any problems.
• If the machine is not used for a long time even though the engine is running, operation may change into manual
regeneration, since automatic regeneration does not start or is not completed normally.
Stop the engine if the machine is not used for a long time.
1. The gauge becomes full.
Automatic regeneration starts.
• The green lamp is lit.
• The buzzer sounds for 2 seconds.
• The following message is displayed cyclically.
Auto DPD Re-gen
Minimum regeneration time: 8 minutes
NOTE: The regeneration time will differ depending on the conditions.
2. The gauge becomes zero.
• The lamp goes out.
• Automatic regeneration is complete.
3 - CONTROLS/INSTRUMENTS
2
4FKEJV-001ZA
3-38
Advertisement
Table of Contents
