Case CX235C SR Operator's Manual page 233

Draining and refilling
1. Park the machine on flat, horizontal ground. Stop the
engine and remove the ignition key.
2. Remove the dipstick (2) and the filler plug (1).
3. Place a receptacle of a suitable capacity under the
upperstructure frame, remove the oil drain plug (3) and
allow the oil to flow out.
NOTE: The oil takes a relatively long time to drain.
ATTENTION: Check the condition of the drained oil. If
it contains metal filings or foreign matter, consult your
CASE CONSTRUCTION Dealer.
4. Install the drain plug (3).
6 - MAINTENANCE
6-49
2
391AB595
3
6CC10F4C