Case CX235C SR Operator's Manual page 225

2. Remove the nut (2) and the cover (3) from the
breather.
3. Remove and discard the used filter element (4).
4. Install a new element (4), making sure the seal (5) is
facing upwards.
5. Install the cover (3) as well as the nut (2).
Replacing the hydraulic fluid
1. Release all pressure in the hydraulic reservoir. Refer
to page 6-34.
2. Remove the reservoir cover plate.
3. Using a pump, remove the fluid from the hydraulic
reservoir. Have a container with a suitable capacity
ready.
6 - MAINTENANCE
6-41
11
19IXC6-002
12
CAC558FC