Hand Signals - Case CX235C SR Operator's Manual

Hand signals

When operating the machine, never attempt to carry out
tasks calling for fine control or working in areas where vis-
ibility is poor or impaired without seeking the assistance
of a signalman. Make perfectly sure that you and the sig-
nalman understand the signals to be used.
The following is a compilation of the Hand Signals to be
used when a flagman is required for Excavator Operation.
All personnel associated with the operation of the exca-
vator should know these signals and their meaning before
attempting to operate this machine.
Raise load vertically
Face machine operatorr, raise right forearm vertical,
with index finger pointing up and move hand in a small
circular motion.
Lower load vertically
Face machine operator, extend right arm down, point
index finger down and move hand in small circular
motion.
2 - SAFETY INFORMATION
1
DC04E038
2
DC04E039
Move load horizontally
Face machine operator, extend right arm toward
operator with hand facing operator and move hand in
direction of movement required.
Move load out horizontally
Face machine operator, extend right arm toward
operator with back of hand facing operator and move
hand in direction of movement required.
2-29
3
DC08E040
4
DC08E041