Table of Contents
Advertisement
6 -
MAINTENANCE###_7_###
GENERAL INFORMATION
Basic instructions
Servicing instructions
WARNING
Improper operation or service of this machine can result in an accident.
If you do not understand a maintenance procedure, or doubt your ability to perform a maintenance
procedure correctly, see your authorized dealer.
Failure to comply could result in death or serious injury.
WARNING
Improper operation or service of this machine can result in an accident.
Raised equipment or machine movement without an operator can cause serious injury. Always do the
following before performing any maintenance:
Park the machine on flat, level ground.
Lower the attachment to the ground.
Shut down the engine and remove the ignition key.
Lock the tracks.
Failure to comply could result in death or serious injury.
NOTICE: Be sure all the service operations in this section are carried out punctually at the intervals given, in order to
ensure optimum performance levels and maximum safety when using the machine.
• Respect the maintenance intervals by checking the hourmeter every day. Before starting maintenance, park the
machine on flat, firm ground, away from any obstacles, with the arm retracted and the bucket on the ground. Lower
the dozer blade (if equipped) until it rests on the ground. Unless otherwise specified, all maintenance operations
must be carried out with the engine stopped, and the key removed from the ignition key. It is preferable to wait for
all circuits to cool down before starting work.
• Clean the grease fittings before lubrication. Clean around plugs and filler holes before adding fluid. No dust or
dirt must enter the components or the circuits. Wear suitable clothing and remember to use the necessary safety
equipment.
• When carrying out service work on the machine, place a "Do not operate" tag on the instrument panel. Never climb
down from the operator's compartment leaving the engine running.
• Remove the necessary lower panels during maintenance of certain machine components.
WARNING
Moving parts!
Make sure the lower panels are properly closed before driving the machine.
Failure to comply could result in death or serious injury.
Any modification to this machine without prior authorization could cause serious injury. Do not make any modifications
without authorization. Consult your CASE CONSTRUCTION Dealer.
NOTICE: If you use your machine in particularly harsh conditions (dusty or corrosive atmosphere, etc.), the servicing
intervals should be reduced accordingly.
NOTICE: Take particular care to replace all filters regularly. Clean filters mean longer engine running life.
ATTENTION: Oil and fluid should not be thrown on the ground. They must be stored and removed by a company
which is responsible for their recycling or their disposal.
6 - MAINTENANCE
6-1
W0157A
W0944D
W0910A
Advertisement
Table of Contents
