Safety Decals - Case CX235C SR Operator's Manual

Safety decals

WARNING
Avoid injury!
An illegible or missing decal can have far-reaching consequences. Inspect decals daily.
Failure to comply could result in death or serious injury.
WARNING
Avoid injury!
Make sure decals are perfectly legible. Clean decals regularly. Replace all damaged, missing, painted
over, or illegible decals. See your dealer for replacement decals. When replacing parts bearing decals,
be sure to put new decals on each new part.
Failure to comply could result in death or serious injury.
The following safety decals are placed on your machine as a guide for your safety and for those working with you.
Walk around the machine and note the content and location of these safety decals before operating your machine.
Keep safety decals clean and legible. Clean safety decals with a soft cloth, water, and a gentle detergent. Do not use
solvent, gasoline, or other harsh chemicals. Solvents, gasoline, and other harsh chemicals may damage or remove
safety decals.
Replace all safety decals that are damaged, missing, painted over, or illegible. If a safety decal is on a part that
is replaced, make sure the safety decal is installed on the new part. See your CASE CONSTRUCTION Dealer for
replacement safety decals.
Safety decals that display the "Read Operator's Manual"
symbol are intended to direct the operator to the oper-
ator's manual for further information regarding mainte-
nance, adjustments, or procedures for particular areas of
the machine. When a safety decal displays this symbol,
refer to the appropriate page of the operator's manual.
NOTE: This chapter only covers decals relating to safety and machine operation and servicing. For information on all
decals on the machine, consult the spare parts catalogue.
2 - SAFETY INFORMATION
2-8
1
OM0000
W0228A
W0229A