Table of Contents
Advertisement
Draining
CAUTION
Burn hazard!
Hot coolant can spray out if you remove the
filler cap while the system is hot. After the
system has cooled, turn the filler cap to the
first notch and wait for all pressure to release
before proceeding.
Failure to comply could result in minor or
moderate injury.
1. Remove the radiator plug.
2. Remove three bolts on the protective panel in the rear
left-hand compartment under the radiator and remove
the panel to access the radiator drain valve.
3. Open the radiator drain valve located in the rear left-
hand compartment.
4. Open the drain plug located on the engine block.
NOTE: Have a receptacle of a suitable capacity ready.
6 - MAINTENANCE
C0043A
6-24
2
K272V1-002
3
K272V1-003
4
K272V1-008
Advertisement
Table of Contents
