Tips For Sending Faxes - Lexmark S815 User Manual

Tips for sending faxes

Before you send a fax:
•
Make sure that the printer is on and connected to a working telephone, DSL, or VoIP line. The line is working if
you hear a dial tone.
•
When using the scanner glass, close the scanner lid to avoid dark edges on the scanned image.
•
Look for the placement corner located on the lower right side of the scanner glass. This serves as a guide for
proper document placement.
•
To capture an instant preview scan, put the document or photo on the scanner glass and close the scanner lid.
•
To maximize scanning capacity of the printer, use the scanner clip found in the upper part of the glass to keep
photos, cards, or other small media in place.
Sending faxes using the printer control panel
1
Load an original document.
The Instant Preview home screen appears.
2
Touch Fax.
3
Send the fax:
To send a fax to a single recipient:
a
Enter a fax number, or touch Address Book or History to import a contact.
b
Touch .
To send a fax to multiple recipients (broadcast fax):
a
Touch Fax to Multiple, and then touch Add a Number.
b
Enter a fax number, or touch Address Book or History to import a contact. Repeat this step until you have
entered the numbers of all the recipients.
Touch Accept every time you add a recipient.
c
Touch .
Warning—Potential Damage: Do not touch the cables or the and ports while sending a fax.
Faxing
90