Scanning To A Computer Over A Network Using The Control Panel - Lexmark 7550 Series User Manual

If you set a PIN during network setup and are being asked for it:
1 Enter the PIN using the '_ and _ to select a digit location and the A and V to select a value for that
digit.
2 Press _/.
4 Wait until the printer has finished downloading the scan applications list.
5 Press Y repeatedly until Change Default Settings is highlighted.
6 Press _/.
Color Choose to scan your document in color or black and white.
Quality Choose a scan quality: Automatic, 150 dots per inch (dpi), 300 dpi, or 600 dpi.
Original Size Set the size of the original document: Auto Detect, L, 2L, A6, A5, B5, A4, Wallet,
3 in x 5 in, 4 in x 6 in, 4 in x 8 in, 5 in x 7 in, 8 in x 10 in, or letter.
7 Use the control panel buttons to navigate the menu items and make your choices.
8 Press _ to save your settings.
Scanning to a computer over a network using the control panel
1 Make sure:
° The printer is connected to a network through a print server or through the wireless network connection.
• The printer, the print server (if used), and the computer receiving the scan are all turned on.
• The printer is configured to scan over a network.
2 Load an original document facedown on the scanner glass.
3 From the control panel, press ,&. or Y repeatedly until scan is highlighted.
4 Press _.
5 Press ,& or 'V' repeatedly until the computer to which you want to scan is highlighted.
6 Press _/.
If you set a PIN during network setup and are being asked for it:
a Enter the PIN using the _ and _ to select a digit location and the ,A, and V to select a value for that digit.
b Press _/.
7 Wait until the printer has finished downloading the scan applications list.
8 Make your selections using the control panel buttons.
9 Press _.
111