Installing The Expansion Cabinet On A Wall - Nortel Business Communications Manager 450 Installation Manual

2
3
4
5
6
7
8
9

Installing the expansion cabinet on a wall

To mount the BCM450 expansion cabinet on a wall, you must install the
expansion cabinet on the previously installed wall-mount bracket. You cannot
install the expansion cabinet directly on a wall.
Prerequisites
• A wall-mount bracket kit (NTAB3422).
• Obtain five #8 x 2 cm (#8 x 0.75 in.) round-head wood screws to attach the
wall-mount bracket to the backboard (or wall).
• Obtain tools for the installation including a screwdriver (for the wood
screws), a level, and a pencil.
• You can install a plywood backboard onto the wall to simplify the
installation of the expansion cabinet. For more information, see
the backboard (page
• Obtain an appropriate screwdriver.
Step
1
Copyright © 2006-2009 Nortel Networks
Align the screw holes between the expansion cabinet and the right rack-
mount bracket.
Fasten the bracket to the expansion cabinet by using the four screws.
Align the screw holes between the expansion cabinet and the left rack-
mount bracket.
Fasten the bracket to the expansion cabinet by using four screws.
Determine the location in the rack where you want to install the expansion
cabinet.
Position the expansion cabinet in the rack. Have an assistant hold the
expansion cabinet.
Align the holes in the rack-mount bracket with the holes in the equipment
rack rails.
Fasten the rack-mount brackets to the rack using the four supplied rack
screws.
32).
Action
Place the wall-mount bracket on the backboard (or wall) and mark the
location of the screw holes. Use a bubble level to ensure that the wall-mount
bracket is level with the plywood backboard.
Nortel Business Communications Manager 450 1.0
Installation — System
NN40160-301 01.04 Standard
July 2009
BCM450 expansion cabinet installation 39
--End--
Mounting