Mounting The Backboard - Nortel Business Communications Manager 450 Installation Manual

32 BCM450 main unit wall-mount installation
Figure 7
BCM450 main unit wall-mount installation procedures
BCM450 main unit wall-mount installation navigation
• Mounting the backboard (page 32)
• Installing the main unit using a wall-mount bracket (page 33)

Mounting the backboard

Mount a plywood backboard on a wall to simplify installation of your BCM450
main unit and optional expansion cabinet.
Prerequisites
• Ensure plywood backboard is 2 cm (3/4 in.) thick.
• Obtain a pencil, ruler, screwdriver, and a level.
• Obtain appropriate screws and optional wall anchors to attach the
backboard to the wall.
Procedure steps
Step
1
2
3
Copyright © 2006-2009 Nortel Networks
Action
Use a pencil to mark the desired location of the plywood backboard on the
wall.
Use a ruler and a level to make sure that the plywood backboard is level.
Mount the plywood backboard securely to the wall with appropriate screws.
Nortel Business Communications Manager 450 1.0
Installation — System
NN40160-301 01.04 Standard
July 2009