Nortel Business Communications Manager 450 Installation Manual page 28

28 Installing the BCM450 main unit on a rack
Attaching the rack-mount bracket
Figure 5
4
5
6
7
8
9
Copyright © 2006-2009 Nortel Networks
Align the screw holes between the BCM main unit and the left rack-
mount bracket.
Fasten the bracket to the main unit using four screws.
Determine the location in the rack where you want to install the main
unit.
Position the main unit in the rack. Have an assistant hold the main
unit.
Align the holes in the rack-mount bracket with the holes in the
equipment rack rails.
Fasten the rack-mount brackets to the rack using the four supplied
rack screws.
Nortel Business Communications Manager 450 1.0
Installation — System
NN40160-301 01.04 Standard
July 2009