Bcm450 Main Unit Wall-Mount Installation - Nortel Business Communications Manager 450 Installation Manual

BCM450 main unit wall-mount
installation
This chapter describes how to install a BCM450 main unit on a wall. To
wall-mount a BCM450 unit, you need a wall-mount bracket. The BCM450 unit
connects to the wall-mount bracket.
Prerequisites to BCM450 main unit wall-mount installation
• wall-mount bracket kit NTAB3422
• four #10 x 2.5cm (#10 x 1in.) round-head wood screws
• plywood backboard 2 cm (3/4 in.) thick
BCM450 main unit wall-mount installation procedures
This task flow shows you the sequence of procedures you perform to install a
main unit on the wall. To link to any procedure, go to
mount installation navigation (page
Copyright © 2006-2009 Nortel Networks
Nortel Business Communications Manager 450 1.0
Installation — System
NN40160-301 01.04 Standard
July 2009
BCM450 main unit wall-
32).