Analog Terminal Adapter Installation - Nortel Business Communications Manager 450 Installation Manual

Analog terminal adapter installation

This chapter describes how to install an analog terminal adapter (ATA) or ATA2
for the BCM450. You can use an ATA to connect a standard analog voice
device or data communication device to the BCM system through a digital
station module. Examples of analog voice devices include analog telephones
and answering machines. Examples of data communication devices include
modems and fax machines.
Prerequisites to ATA2 installation
• In North America, the ATA2 must be powered from a UL- and CSA-
approved Class 2 power source.
• In Europe, the ATA2 must be powered from a Class II power source that is
CE marked.
Analog terminal adapter installation procedures
This task flow shows you the sequence of procedures you perform to install
an ATA2. To link to any procedures, go to
installation procedures (page
Copyright © 2006-2009 Nortel Networks
86).
Nortel Business Communications Manager 450 1.0
Installation — System
NN40160-301 01.04 Standard
July 2009
Figure 16 Analog terminal adapter