Additional Hardware; Tools - Nortel Business Communications Manager 450 Installation Manual

Table 12 Station MBMs (2 of 2)
Module type
GASM (ASM8)
(see Analog station
media bay modules
on page 45)

Additional hardware

In addition to the main unit, expansion cabinet, and MBMs, the BCM450
system includes the additional hardware listed in the following table.
Table 13 Additional hardware descriptions
Hardware
Wall-mount bracket
Uninterruptible power supply (UPS)
(if applicable)

Tools

Use the following table to view and record the tools required for your BCM450
installation.
Copyright © 2006-2009 Nortel Networks
Function
Connects a maximum of eight analog
devices to the BCM450 system.
This module provides the following
additional services: caller ID, pass
through, message waiting indication,
and disconnect supervision at the
telephone.
This module downloads new firmware.
Description
A bracket designed to mount a BCM450 unit (main unit or
expansion cabinet) to a wall.
An uninterruptible power supply (UPS) is an optional device that
maintains continuous operation during power interruption or
failure conditions. The UPS provides power-source monitoring
and battery-backup activation to maintain critical BCM450
functionality.
BCM450 supports American Power Conversion (APC) UPS
devices that use a USB control interface. The UPS control
software configures various operational settings.
Nortel Business Communications Manager 450 1.0
Installation — System
NN40160-301 01.04 Standard
July 2009
System information and tools 125
Notes
—