Connecting The Ata2; Prerequisites - Nortel Business Communications Manager 450 Installation Manual

86 Analog terminal adapter installation
Figure 16 Analog terminal adapter installation procedures
Analog terminal adapter installation procedures navigation
• Connecting the ATA2 (page 86)
• Mounting the ATA2 to a wall (page 87)
• Testing insertion loss measurement from the CO to the analog device
(page 88)
• Testing insertion loss measurement from the analog device to the CO
(page 88)
• Configuring the ATA2 (page 89)

Connecting the ATA2

After you have set up the correct environment, connect the BCM system and
the analog device to the ATA2, and then connect the power.

Prerequisites

• An available station port on the BCM450 system is required.
Copyright © 2006-2009 Nortel Networks
Nortel Business Communications Manager 450 1.0
Installation — System
NN40160-301 01.04 Standard
July 2009