Replacing a transceiver module
Gently open the clasp on the transceiver module. If the clasp is obstructed and you cannot use
1.
your finger to open it, use a pair of flat-head tweezers to open it.
Hold the clasp and pull the transceiver module slowly out of the fiber port.
2.
Insert a dust plug into the transceiver module port and keep the removed transceiver module
3.
secure.
Install a new transceiver module or insert a dust plug into the fiber port if you are not to install a
4.
new transceiver module.
Figure 18 Removing a transceiver module
20