Atlas Copco ZR 200 Instruction Book page 52

Reference
1
2
3
4
5
6
17
18
20
21
22
24
25
30
36
37
38
41
42
43
44
51
52
53
54
55
56
57
58
50
Description
Right side view
Front view
Motor cooling air outlet
Compressed air inlet
Motor cooling air inlet (only for option: separate air intake)
Motor cooling air inlet + compressor air inlet (for standard unit)
Automatic drain of intercooler G 1/2" (female)
Automatic drain of aftercooler G 1/2" (female)
Voltage supply: entrance for fixed speed compressors with supply ≤ 690 V
Voltage supply entrance:
• for fixed speed compressors with supply > 690 V
• VSD compressors (possibility 1)
• compressors with foot mounted motors
Top view
Compressed air outlet DN 80 PN 16 acc. DIN 2633 (Scale 1:5)
Compressed air outlet 3" 150 Lbs acc. ANSI B16.5 (Scale 1:5)
Compressed air outlet
Rear side view
Grating only for option: separate air intake
Voltage supply: entrance for VSD compressors (possibility 2)
Opening for transportation
4 slotted holes to pull the compressor out of a container
Net mass of a standard compressor
Net mass of a compressor without a motor
Center of gravity Z 160-275
Center of gravity Z 250/315 VSD
Left side view (for hot air version)
Hot air version
Standard version
Water in/out DN 50 PN 16 acc. DIN 2633 (Scale 1:5)
1540 lb should be added in case of a high ambient temperature compressor or an
oversized motor or a motor with supply voltage > 690 V
Automatic drain of aftercooler G 1/2" (female) (not for hot air version)
Instruction book
AIF999999