Atlas Copco ZR 200 Instruction Book page 24

Safety precautions
It is important to follow all regulations regarding the use of radio equipment, in particular
regarding the possibility of radio frequency (RF) interference. Please follow the safety advice
given below carefully.
• Respect restrictions on the use of radio equipment in fuel depots, chemical plants or other
explosive environments.
• Avoid operation close to inadequately protected personal medical devices such as hearing
aids and pacemakers. Consult the manufacturers of the medical device to determine if it is
adequately protected.
• Avoid operation close to other electronic equipment which may also cause interference if the
equipment is inadequately protected. Observe any warning signs and manufacturer
recommendations.
• Respect a distance from the human body of at least 20 cm (8 inch) during operation.
• Do not operate the device in areas where cellular modems are not advised without proper
device certifications. These areas include environments where cellular radio can interfere,
such as explosive atmospheres, medical equipment, or any other equipment which may be
susceptible to any form of radio interference. The modem can transmit signals that could
interfere with this equipment.
SMARTLINK
The machine is SMARTLINK-ready.
SMARTLINK is Atlas Copco's web-based platform to monitor compressed air installations. It is
available in 3 product levels:
• SMARTLINK Service
SMARTLINK Service rules out all uncertainties. Scheduling maintenance visits becomes as
simple and easy as it should be; the service log book is always just one click away and the
online link with Atlas Copco allows to request and quickly receive quotes for spare parts or
additional services.
This product level is free of charge and available for 3 years following the machine
purchase.
• SMARTLINK Uptime
SMARTLINK Uptime keeps your compressors up and running. By e-mail and/or text, you
receive all relevant machine indications (warnings and shutdowns) in advance. Based on
this information, you can then take all necessary actions and measures to avoid the risk of a
breakdown.
This product level is available as a free of charge 3-month trial.
• SMARTLINK Energy
SMARTLINK Energy safeguards the performance of your equipment. It enables you to
continuously monitor and analyze the energy efficiency of the compressor room. You decide
which performance indicators, benchmarks and reports are created. You can make accurate
and immediate improvements when needed. The results can be used for energy monitoring
according to ISO50001.
This product level is available as a free of charge 3-month trial.
Once a SMARTLINK level is chosen, gaining access is the next step. To gain access at least one
machine SMARTLINK-ready component (compressor, dryer, ...) is required. Follow the next
steps:
• Gather the information about the SMARTLINK-ready machine(s) (e.g. picture of the data
plate; invoice,...)
• Go to the SMARTLINK web site http://www.atlascopco.com/smartlink
• Click on the left button in the screen below.
22
Instruction book
AIF999999