Table of Contents
Advertisement
5.7
Manual loading/unloading
Control panel
General
Normally, the compressor runs in automatic operation, i.e. the electronic regulator loads, unloads,
stops and restarts the compressor automatically. Sign (4) is then alight.
If required, the compressor can be unloaded manually. In this case, the compressor is switched
out of automatic operation i.e. the compressor remains running unloaded unless it is loaded
again manually.
Manual unloading
Starting from the main screen, select Unload. The compressor starts running unloaded and sign
(4) fades. The message Manual Unload appears on the display.
Manual loading
Starting from the main screen, select Load. Sign (4) lights up and the compressor starts running
loaded in case the air net pressure drops below the programmed level. The message Load
appears on the display.
86
Control panel of controller
Instruction book
AIF999999
Hide quick links:
Advertisement
Table of Contents
