Table of Contents
Advertisement
Model T40
Step 1. Remove the front bezel assembly (see "Front Bezel Assembly (Model T40)" on
Step 2. Remove the power switch and cable assembly (see "Power Switch and Cable
Step 3. Remove the remote-power-on control unit if present (see "Remote-Power-On
Step 4. Refer to Figure 125.
1
Figure 125. Removing the Frame from a Model T40 (1)
Step 5. Remove the bottom two mounting screws 1 from the front of the frame
218
7133 Models D40 and T40 Service Guide
page 183).
Assembly (Model T40)" on page 190).
Control Unit (Model T40)" on page 206).
assembly. (You removed the top two screws and RFI bracket when you
removed the front bezel.)
1
Advertisement
Table of Contents
