Table of Contents
Advertisement
Step 2. (from step 1)
Step 3. (from step 2)
100
7133 Models D40 and T40 Service Guide
a. Reinstall one of the power supply assemblies.
b. Connect a power cable to the power supply assembly.
c. If you are servicing a Model T40, press and release the power switch.
d. Switch on the power supply assembly. The 7133 switches on
automatically.
Note: Unless a procedure needs you to switch off the 7133, leave the
7133 switched on for the remainder of this MAP.
Does the 7133 emit smoke or a smell of burning?
NO
Go to step 3.
YES
a. In the sequence shown, exchange the following FRUs for new
FRUs:
1) The power supply assembly that you have just reinstalled
(see "Power Supply Assemblies" on page 162).
2) Frame assembly (see "Frame Assembly" on page 208).
b. Go to step 3.
a. Reinstall the other power supply assembly.
b. Connect a power cable to the power supply assembly.
c. Switch on the power supply assembly.
Note: Unless a procedure needs you to switch off the 7133, leave the
7133 switched on for the remainder of this MAP.
Does the 7133 emit smoke or a smell of burning?
NO
Go to step 4 on page 101.
YES
a. In the sequence shown, exchange the following FRUs for new
FRUs:
1) The power supply assembly that you have just reinstalled
(see "Power Supply Assemblies" on page 162).
2) Frame assembly (see "Frame Assembly" on page 208).
b. Go to step 4 on page 101.
Advertisement
Table of Contents
