Table of Contents
Advertisement
c. Check whether the Ready light 2 comes on.
v If the Ready light comes on and remains on continuously, or flashes
quickly (five times per second), go to step 10.
v If the Ready light does not come on, or flashes slowly (two seconds on,
two seconds off), go to "MAP 2010: 7133 Models D40 and T40 –
START" on page 87. When you have solved the problem, return to this
section, and go to step 10.
Step 10. Refer to Figure 81
1
2
Figure 81. Installing the Lock onto a Module (1)
Step 11. If the module has a lock 1 , go to step 12.
If the module does not have a lock, go to step 16 on page 160.
Step 12. Insert the flange 2 of the lock into the slot in the front of the disk drive
module.
Chapter 3. Removal and Replacement Procedures
159
Advertisement
Table of Contents
